ABS Split Hull Boats Review and Specs

Year: 2007  
Manufacturer: Scruton Marine Services
Price: US$1,300,000  

---

2007 140′ x 40′ x 2’5″ to  9’10”  850 cu. yd. ABS Split Hull Dump Scow ABS Load Line Gross tonnage: 564 tons Shell plating thickness: 1/2″ to 4″ Remote control split hull dump scow Headroom in engine room : 5′ Engine: John Deere 5030 – 99 hp = 60 hours Used very little Last survey: October, 2010 Located in Massachusetts Additional Information: Built in 2007 of 1/2″ hull, 5/8 hopper, very thick steel around hinge assembly’s both above and bellow decks. ABS certified, Load line, 850 cubic yard capacity. Dimensions are 140′ x 40′ molded x 12′. Diesel HPU mounted inside all 1/2″ steel engine room with ski light and single lever ABS door (starboard stern corner of deck). John Deere 5030 (roughly 70 hours since new) with fuel and oil tank integral with house. Remote control start, dump, close, and shut down with cruise feature and a range of 1,500 feet. Two 600,000 pound capacity stainless steel no-leak pistons. Emergency deployable 2,500lb Navy anchor on forward port bow. Silent inspector system currently installed. All Hydraulics supplied and installed by Pine Hill Equipment and Hydraulics.   Price reduced from $1,450,000 USD to $1,300,000 USD Reference No. B2236

---

Fuel  Hull Material  Beam  Length Overall  Number of Engines

Other Steel 40 ft 140 ft 1

---

Contact Information

Phone: Fax

(519) 583-1636 519 583 2189

Please Add a comment before the calling of ABS Boats, we will inform your mail address to the owner of the boats. They will reach you by email or phone.